|
New Outback XT Mufflers install video |
|
|
|
 New from AVO is a set of dual mufflers made specifically for the 2005-2009 Outback. These photos are of the pre-production units that will be used for testing. They are made of high-quality stainless steel and will bolt up to a stock mid-pipe system or the AVO 3" mid-pipe for the Outback XT. We have just done the test-fit of the new mufflers as well, and included a short video of them on a stock Outback XT with standard mid-pipe and downpipe.
The install process was fairly painless, though we do suggest loosening up the midpipe where it connects to the downpipe. This helps in aligning the rear mufflers correctly at the rear - because of the Subaru design with that long, T-shaped midpipe section, even a little bit of rotation at the front of the car can put it off an inch or so at the rear. So get the rear mufflers aligned up correctly first with all bolts loose, then tighten up the bolts from the mid-pipe to the mufflers, then finally the bolts from the mid-pipe to the downpipe.
  
|
